Thanks for the feedback! Much appreciated.. Turned out it was something
stupid on my behalf. I did not set the MaxBytes figure in the MRTG
config file for the device high enough. The cfgmaker put in a value
which was way too low put it up to something in the line of
10000000000000 and all is well.

Cheers,
Francis.
 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: Friday, 18 June 2004 4:43 AM
To: [EMAIL PROTECTED]; James Edwards
Subject: [mrtg] Re: CISCO GRE Tunnels

According to Cisco 12.3.5  lacks a lot of the SNMP support.  This is
where I was running into problems.  I just upgraded my IOS to 12.3.9.
At one site I actually had to downgrade to 12.1 to get everything I need
in the IOS.


----- Original Message -----
From: "James Edwards" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 16, 2004 2:31 AM
Subject: [mrtg] Re: CISCO GRE Tunnels


> It would not surprise me that SNMP support for GRE is lacking
> in some IOS. I'll test 12.3 and let you know. Do an snmp-walk
> or use you favorite tool to query this interface and see whats up.
> If you are not getting any values off octets in/out but have traffic,
> I would suspect IOS.
> Hmmm....
>
> What does the output of 'show ip interface tunnel<what ever>' look
> like ? The part about switching and cef is want I am interested in.
> Also what IOS are you running on each router ?
>
>
> -- Attached file removed by Ecartis and put at URL below --
> -- Type: application/pgp-signature
> -- Desc: This is a digitally signed message part
> -- Size: 190 bytes
> -- URL : http://www.ee.ethz.ch/~slist/p/77-signature.asc
>
>
> --
> Unsubscribe mailto:[EMAIL PROTECTED]
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



***********************************************************
It is confidential to the addressee and may contain certain copyright and/or 
legally privileged infomration.  No-one else other than, on behalf of the 
addressee, may read, print, store, copy, forward or act in reliance on all or 
any part of it or its attachments.  You must scan this email and any attached 
files for viruses.  We accept no liability for any loss, damage or consequence 
resulting either directly or indirectly from the use of attached files. 

--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Reply via email to