The PIX will not respond to requests on the outside interface unless they are encrypted. SNMP & telnet need to be encapsulated in an IPsec tunnel. But ssh will work without the IPsec tunnel since it is already encrypted.
Keith Johnson LAN Administrator Amcor Sunclipse North America 6600 Valley View Street, Buena Park, CA 90620 Voice: 714.562.6179 Fax: 714.562.2036 Email: [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Friday, June 18, 2004 10:30 AM To: [EMAIL PROTECTED] Subject: [mrtg] PIX Hi..guys, I´m trying to setup the MRTG to get information from the PIX firewall, and the pix is configured for snmp, the host ip is correct on pix, and public string too. But i still got the error no response received. I´m trying to connect through the outside interface, and the ACL have a permit line for snmp. Any help will be apprecieted. Thanks and Best Regards ================================================ Fabio Al kas ICNET Network Coordinator Infrastructure & IT Ph.:55 11 2191 5902 Mobile: 55 11 9229 7981 America OnLine - Brazil -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
