List Members - I have a Cisco 2610XM with a 16 port analog modem network module. The modem ports are in an async group linked to the Loopback interface. I'm able to get MRTG to report the FastEthernet0/0 interface graph, but I can't get MRTG to report the Async interfaces' utilization (which I'm trying to do by description). Here is the important info from my .cfg file.
this is what the ./cfgmaker call gave me. Target[IPADDRESS_Async33]:\Async33:[EMAIL PROTECTED]: SetEnv[IPADDRESS_Async33]: MRTG_INT_IP="" MRTG_INT_DESCR="Async33" MaxBytes[IPADDRESS_Async33]: 14375 Title[IPADDRESS_Async33]: Async33 - C2610XM_MP PageTop[IPADDRESS_Async33]: <H1>C2610XM_MP</H1> <TABLE> <TR><TD>System:</TD> <TD>C2610XM_MP in </TD></TR> <TR><TD>Maintainer:</TD> <TD></TD></TR> <TR><TD>Description:</TD><TD>Async33 </TD></TR> <TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR> <TR><TD>ifName:</TD> <TD>As33</TD></TR> <TR><TD>Max Speed:</TD> <TD>115.0 kbits/s</TD></TR> </TABLE> I got this code from Somix Target[C2610XM_MP_util33]: \Async33:[EMAIL PROTECTED] MaxBytes[C2610XM_MP_util33]: 14375 Options[C2610XM_MP_util33]: bits, unknaszero Title[C2610XM_MP_util33]: C2610XM_MP Async33 Utilization PageTop[C2610XM_MP_util33]: <H1>C2610XM_MP Async33 Utilization</H1> YLegend[C2610XM_MP_util33]: Port Utilization LegendI[C2610XM_MP_util33]: In LegendO[C2610XM_MP_util33]: Out Legend1[C2610XM_MP_util33]: Inbound Bits Legend2[C2610XM_MP_util33]: Outbound Bits Legend3[C2610XM_MP_util33]: INBOUND Max value per interval on graph Legend4[C2610XM_MP_util33]: OUTBOUND Max value per interval on graph Colours[C2610XM_MP_util33]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff WithPeak[C2610XM_MP_util33]: ymw but that also doesn't work. I'm trying to get the CPU utilization working via OIDs, but that's another post. Cheers, P -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
