Your 'workdir' seems to have the wrong slash after mrtg and you forgot the 'libadd' that points to the rrdtool\perl-shared folder. You also need the 'icondir' option
Here's what I have in my cfg file: Workdir: D:\rrdtool-1.0.40\Database\ PathAdd: D:\rrdtool-1.0.40\bin\ LibAdd: D:\rrdtool-1.0.40\perl-shared\ Icondir: /images/ logformat: rrdtool Refresh: 300 RunAsDaemon: Yes Interval: 5 Hope that helps. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Didier Sent: Tuesday, July 27, 2004 2:01 PM To: Dan Didier; [email protected] Subject: [rrd-users] Re: RRD file creation I am trying to use mrtg with rrd tool. I have created my config file, and set the variable to tell it to use rrdtool. When I run mrtg, I get no file created. I am running this on a windows 2000 server. Here is the contents of my config file: # Created by # c:/mrtg/mrtg/bin/cfgmaker --global 'Interval: 1' --global 'PathAdd: c:\mrtg\rrdtool' --global 'LogFormat: rrdtool' --global 'WithPeak[_]: ymw' --global 'workdir: c:\mrtg/wwwroot' --global 'Options[_]: bits,growright' --ifref=name --ifdesc=name --descint --no-down [EMAIL PROTECTED] ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits Interval: 1 PathAdd: c:\mrtg\rrdtool LogFormat: rrdtool WithPeak[_]: ymw workdir: c:\mrtg/wwwroot Options[_]: bits,growright ###################################################################### # System: NEEDSPIX501 # Description: Cisco PIX Firewall Version 6.3(3) # # Contact: # Location: ###################################################################### ### Interface 1 >> Descr: 'PIX-Firewall-'outside'-interface' | Name: '' | Ip: '207.198.41.250' | Eth: '00-0a-f4-ec-ef-c4' ### ### The following interface is commented out because: ### * --ifref=name is not unique for this interface # Target[needspix_1]: 1:[EMAIL PROTECTED]: SetEnv[needspix_1]: MRTG_INT_IP="207.198.41.250" MRTG_INT_DESCR="PIX-Firewall-'outside'-interface" MaxBytes[needspix_1]: 1250000 Title[needspix_1]: 1 -- NEEDSPIX501 PageTop[needspix_1]: <H1>1 -- NEEDSPIX501</H1> <TABLE> <TR><TD>System:</TD> <TD>NEEDSPIX501 in </TD></TR> <TR><TD>Maintainer:</TD> <TD></TD></TR> <TR><TD>Description:</TD><TD>PIX-Firewall-'outside'-interface </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>10.0 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD>207.198.41.250 ()</TD></TR> </TABLE> ### Interface 2 >> Descr: 'PIX-Firewall-'inside'-interface' | Name: '' | Ip: '10.0.0.1' | Eth: '00-0a-f4-ec-ef-c5' ### ### The following interface is commented out because: ### * --ifref=name is not unique for this interface # Target[needspix_2]: 2:[EMAIL PROTECTED]: SetEnv[needspix_2]: MRTG_INT_IP="10.0.0.1" MRTG_INT_DESCR="PIX-Firewall-'inside'-interface" MaxBytes[needspix_2]: 12500000 Title[needspix_2]: 2 -- NEEDSPIX501 PageTop[needspix_2]: <H1>2 -- NEEDSPIX501</H1> <TABLE> <TR><TD>System:</TD> <TD>NEEDSPIX501 in </TD></TR> <TR><TD>Maintainer:</TD> <TD></TD></TR> <TR><TD>Description:</TD><TD>PIX-Firewall-'inside'-interface </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>100.0 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD>10.0.0.1 (needspix)</TD></TR> </TABLE> I was wondering if there is anything you can see here that is wrong, or where I can check? Thanks, Dan Didier -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
