[EMAIL PROTECTED] wrote: > Moses Hernandez wrote: [snip] > As for everyone else talking about MLS, that only applies when > monitoring VLANS I thought. Here he's monitoring layer 2, > not layer 3, > and thus it should be accurate for every octet that passes the port. > > I could be wrong... > > Eric Brander
You could be right... It wasn't clear to me if he was monitoring the actual port or the VLAN, so perhaps some clarification is in order. Moses, are you attempting to graph the bandwidth of an actual port on the switch, or is this a VLAN interface? If it's a VLAN interface, then what I wrote in my last email is valid. If an actual switch port, take a close look at the response that Eric sent a few minutes ago. Garry W. Cook, CCNA Network Infrastructure Manager MACTEC, Inc. - http://www.mactec.com/ 303.308.6228 (Office) - 720.220.1862 (Mobile) -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
