I am running MRTG using routers2.cgi as my front end. I have a Cisco 2650 router with 1 ethernet and 3 T1 interfaces. I can measure data on the ethernet0/0 interface and the serial 0/0 interface. No matter what I try I cannot get serial0/1:0 and serial0/2:0 to reply. The error that I get is: ###Interface 4 >> Descr: 'T1-0/1' | Name: 'T1 0/1' | Ip: '' | Eth: '' ###The following interface is commented out because: ### * it is a DS1 controllers ### * got 'Received SNMP response with error code ### error status: noSuchName ### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.4) ### SNMPv1_Session (remote host: "172.18.1.20" [172.18.1.20].161) ### community: "public" ### request ID: -1752370354 ### PDU bufsize: 8000 bytes ### timeout: 2s ### retries: 5 ### backoff: 1)' from interface when trying to query ### Interface 5 >> Descr: 'T1-0/2' | Name: 'T1 0/2' | Ip: '' | Eth: '' ### ### The following interface is commented out because: ### * it is a DS1 controllers ### * got 'Received SNMP response with error code ### error status: noSuchName ### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.5) ### SNMPv1_Session (remote host: "172.18.1.20" [172.18.1.20].161) ### community: "public" ### request ID: -1752370353 ### PDU bufsize: 8000 bytes ### timeout: 2s ### retries: 5 ### backoff: 1)' from interface when trying to query ### Interface 6 >> Descr: 'Serial0/1:0' | Name: 'Se0/1:0' | Ip: '172.19.2.24' | Eth: '' ### ###Target[172.18.1.20_Se0_1_0]: #Se0/1:0:[EMAIL PROTECTED]: ###SetEnv[172.18.1.20_Se0_1_0]: MRTG_INT_IP="172.19.2.24" ###MRTG_INT_DESCR="Serial0/1:0" ###MaxBytes[172.18.1.20_Se0_1_0]: 192000 ###Title[172.18.1.20_Se0_1_0]: #Se0/1:0 -- 2650main ###PageTop[172.18.1.20_Se0_1_0]: <H1>#Se0/1:0 -- 2650main</H1> ### Interface 7 >> Descr: 'Serial0/2:0' | Name: 'Se0/2:0' | Ip: '172.21.2.24' | Eth: '' ### ###Target[172.18.1.20_Se0_2_0]: #Se0/2:0:[EMAIL PROTECTED]: ###SetEnv[172.18.1.20_Se0_2_0]: MRTG_INT_IP="172.21.2.24" ###MRTG_INT_DESCR="Serial0/2:0" ###MaxBytes[172.18.1.20_Se0_2_0]: 192000 ###Title[172.18.1.20_Se0_2_0]: #Se0/2:0 -- 2650main ###PageTop[172.18.1.20_Se0_2_0]: <H1>#Se0/2:0 -- 2650main</H1> Where do I begin? -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
