Hi, well, I went through and created config files for all my switches that I am trying to monitor.
Then I ran index maker, and checked the new MRTG webpage that was generated. It's interesting. The core switch is working perfectly - no glitches, everything labeled as it should be etc. The next switch in line, everything is labeled correctly, but there are no graphs showing up The next 2 switches, there are graphs that appear to be working fine, but no unit labels - the ports are correctly identified, but the name of the switch is missing The last one, no labels or graphs. I suspect that the missing labels are probably due to a mis-cofiguration at the switch, I can likely find that with a little digging, the missing graphs has me stumped, any ideas? Also, it seems that either MRTG or NTOP is really dragging my system down. It's a P4HT box with 256 ram and 40 gig hdd running RHEL 3 WS. I don't know if this is normal or if I goofed something up (again) Any help that any of you can offer would be greatly appreciated. Our switches are Foundry EdgeIron 4802 and 2402 and the core is a FastIron Edge 4802 TIM Tim Holmes IT Manager Medina Christian Academy, Inc. A Higher Standard... Jeremiah 33:3 Jeremiah 29:11 Esther 4:14 -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
