On Mon, 15 Nov 2004 10:39:10 +0100, Alex van den Bogaerdt <[EMAIL PROTECTED]> wrote: > > > Hello, > > I am a MRTG newbie. I have MRTG right now monitoring my Cisco 827 > > DSL router/modem. My DSL connection has different maximum upload and > > download speeds. How do I change my configuration so that it takes > > into account those maximums and when I get the statistics (i.e. > > Do RTFM. > > In http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html > you would have read: > > " If you need two different MaxBytes values for the two monitored variables, > you can use MaxBytes1 and MaxBytes2 instead of MaxBytes. " > > which answers your question. > > HTH > Alex > -- > You want an answer? You'd better follow the following guidelines! > Linesize well below 80 chars. Reply to the list, not to me. Trim > irrelevant lines. Reply _below_ the relevant lines, not on top. > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > >
Thanks for your help. I did read this in the documentation, I guess I didn't clarify my question very well. I know I can set MaxBytes1 and MaxBytes2 - my question is how can I tell or define which value MRTG uses for what ? Or more clearly how do I know if the value I input for MaxBytes1 will be used to calculate incoming and not outgoing traffic or vice versa. -- Robert B. Phillips, II [EMAIL PROTECTED] -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
