||Dear Mr. Jon, ||This will only graph the number of advertised prefixes,, am I right ?.. Correct. As a side note, if you own a juniper, you can graph prefixes vs used prefixes.
||Infact I need to graph the traffic going through each(or particular) ||prefixes advertised though us. Your alternative would be netflow, maybe using like pmacct or someting from caida or flow-tools. Hope this helps, ||From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On ||Behalf Of Jon Nistor ||Sent: Monday, January 24, 2005 8:37 PM ||To: Bill Wichers ||Cc: Muhammed Ali; [EMAIL PROTECTED] ||Subject: [mrtg] Re: BGP-IP address || ||||Yes, you can graph BGP route prefixes, but that info is not directly ||||accessible via SNMP. If you dig around through the archives there's a perl ||||script in there that I wrote some years back that will telnet to the ||||router, run 'show ip bgp sum', and parse the results for use by MRTG. || ||You can graph BGP prefixes in 12.0(26)S+ (I believe) || ||snmpwalk -m ALL -v 2c -c public core1 ||1.3.6.1.4.1.9.9.187.1.2.4.1.1.192.168.1.35 ||CISCO-BGP4-MIB::ciscoBgp4MIBObjects.2.4.1.1.192.168.1.35.1.1 = Counter32: ||150973 || ||I'm runinng 12.0(28)S and it shows up. || || || ________ || Jon ([EMAIL PROTECTED]) - iooooio.iioooiii.ioiioioo.iiiiioio || ||: EOF ||: || ||-- ||Unsubscribe mailto:[EMAIL PROTECTED] ||Archive http://www.ee.ethz.ch/~slist/mrtg ||FAQ http://faq.mrtg.org Homepage http://www.mrtg.org ||WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi || || ________ Jon ([EMAIL PROTECTED]) - iooooio.iioooiii.ioiioioo.iiiiioio : EOF : -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
