The first error states there is no SNMP response received. Use an SNMP browser to check if the 1721 gives response to any SNMP request, and after that check what result the specific oid from your configfile gives with the SNMP tool.
Hth, Jan. -----Original Message----- From: Plantier, Spencer [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 15, 2005 8:32 PM To: [EMAIL PROTECTED] Subject: [mrtg] Re: cpu utilization Thanks that got me further, now I get this error: Target[172.30.232.1]: 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0&1.3.6.1.4.1.9.9.109.1.1.1.1.5.0:stiwanro @172.30.232.1 YLegend[172.30.232.1]: CPU Utilization ShortLegend[172.30.232.1]: % MaxBytes[172.30.232.1]: 100 Options[172.30.232.1]: nopercent, gauge, unknaszero Unscaled[172.30.232.1]: dwmy Legend1[172.30.232.1]: CPU Utilization Legend2[172.30.232.1]: . Legend3[172.30.232.1]: Max value per interval on graph Legend4[172.30.232.1]: . LegendI[172.30.232.1]: CPU: LegendO[172.30.232.1]: . Title[172.30.232.1]: $DEVICE PageTop[172.30.232.1]: <H1>$DEVICE</H1> Colours[172.30.232.1]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff WithPeak[172.30.232.1]: ymw C:\MRTG\bin>perl mrtg springboard.cfg SNMP Error: no response received SNMPv1_Session (remote host: "172.30.232.1" [172.30.232.1].160) community: "stiwanro" request ID: -943698335 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) SNMPGET Problem for 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0 1.3.6.1.4.1.9.9.109.1.1.1.1. 5.0 sysUptime sysName on [EMAIL PROTECTED]:160 WARNING: skipping because at least the query for 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0 on 172.30.232.1 did not succeed ERROR: Target[172.30.232.1][_IN_] ' $$target[4]{$mode} ' did not eval into defin ed data ERROR: Target[172.30.232.1][_OUT_] ' $$target[4]{$mode} ' did not eval into defi ned data WARNING: Skipping Update of 172.30.232.1, inlast is not defined WARNING: Skipping Update of 172.30.232.1, outlast is not defined C:\MRTG\bin> Thanks, Spencer ________________________________ From: Muhammed Ali [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 15, 2005 1:39 PM To: Plantier, Spencer; [EMAIL PROTECTED] Subject: RE: [mrtg] cpu utilization All the MRTG configuration lines should start from column 1 other wise that line will be neglected by MRTG. Regards Muhammed Ali -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Plantier, Spencer Sent: Tuesday, February 15, 2005 8:22 PM To: [EMAIL PROTECTED] Subject: [mrtg] cpu utilization I went to Somix and got the configuration for CPU usage for a 1721. I copied and pasted the config to my cfg file and I get the following error: arget[xxxxx]: 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0&1.3.6.1.4.1.9.9.109.1.1.1.1.5.0:stiwanro @xxxxx YLegend[xxxxx]: CPU Utilization ShortLegend[xxxxx]: % MaxBytes[xxxxx]: 100 Options[xxxxx]: nopercent, gauge, unknaszero Unscaled[xxxxx]: dwmy Legend1[xxxxx]: CPU Utilization Legend2[xxxxx]: . Legend3[xxxxx]: Max value per interval on graph Legend4[xxxxx]: . LegendI[xxxxx]: CPU: LegendO[xxxxx]: . Title[xxxxx]: $DEVICE PageTop[xxxxx]: <H1>$DEVICE</H1> Colours[xxxxx]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff WithPeak[xxxxx]: ymw C:\MRTG\bin>perl mrtg springboard.cfg WARNING: "MaxBytes[xxxxx]" not specified WARNING: Option[xxxxx]: "unscaled[xxxxx]:" is unknown WARNING: Option[xxxxx]: "dwmy" is unknown ERROR: Please fix the error(s) in your config file I googled the error to no avail. Any help would be appreciated. Thanks. Spencer Plantier System Network Administrator 301 Gregson Dr Cary, NC 27511 Office 919-379-8513 Cell 919-272-8833 [EMAIL PROTECTED] -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi _________________________________________________________ Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen. _________________________________________________________ The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. _________________________________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
