The reason is because you don't have anything defined in your in your LegendI, Legend0, and possibly your ShortLegend. If you have to just put a non-breaking space like so: LegendI[xxx]: LegendO[xxx]: ShortLegend [xxx]:
This should fix you problem. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Guillermo Hechem Sent: Thursday, February 17, 2005 7:33 AM To: [EMAIL PROTECTED] Subject: [mrtg] Re: No stats in my graphs I`m using 14all.cgi to generate the graphs. But if you forget about rrdtool, which means MRTG running alone with the same configuration file but without these lines: LogFormat: rrdtool PathAdd: c:\rrdtool\bin LibAdd: C:\Perl\site\lib\ppm-conf the results were the same. Good graphs but no stats... ----- Original Message ----- From: "William Owen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, February 16, 2005 5:49 PM Subject: [mrtg] Re: No stats in my graphs > You say that you are using RRDTool as a backend. If that is the case and > your rrd files are getting updated, it is more than likely a configuration > issue with the front-end you are using to generate your graphs as most of > them give you the ability to specify/omit most elements of the graph. > What > are you using as a front-end? -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
