I have tried their templates but they don't seem to give the complete OID.
-----Original Message----- From: Stefano Giraldo [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 09, 2005 3:12 AM To: RL Glauser; [EMAIL PROTECTED] Subject: Re: [mrtg] Re: CPU & Memory usage template. Hi, try to use the SOMIX MRTG repository templates. Look here: http://www.somix.com/support/mrtg_repository.php?cmd=vendor&vendor=10&ve ndor_name=Cisco They always work fine. Bye, Ste. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 07, 2005 10:13 PM Subject: [mrtg] Re: CPU & Memory usage template. > I was able to adapt your script to work on a Cisco 3550 switch and it > works well. When I try to adapt it to Cisco 2600 series routers I only > get intermittent bits of data as if to suggest that the router isn't > working. When I do a MIBwalk I can find the 5sec and 5min OID's and they > are reporting data. I would think that the CPU on a router would be just > as busy as the switch, but that doesn't seem to be the case. I am using > 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1&.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1:communi > [EMAIL PROTECTED] > Any ideas? > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Jon Krause > Sent: Saturday, March 05, 2005 12:01 PM > To: chanapli knap; [EMAIL PROTECTED] > Subject: [mrtg] Re: CPU & Memory usage template. > > > ----- Original Message ----- > From: "chanapli knap" > Sent: Saturday, March 05, 2005 11:35 AM > Subject: [mrtg] CPU & Memory usage template. > > > : Do anyone has a template for CPU and Mem usage for > : Cisco Catalyst switches (45xx ,29xx, 35xx) please.. > : > : > > > ################################## > > This will work for 5min / 5sec CPU utilization for Cisco Catalyst 2900 > switches (most, check any deviation of OID's from different Cisco IOS's- > YMMV) > > If you have support access to Cisco use: > http://www.cisco.com/cgi-bin/Support/Mibbrowser/unity.pl?tab=2 > > Substitute the proper OID (twice) for mem usage, also adjust target > [target] > and other parameters (Legends and Page Tops, etc) for a mem usage > template. > > Hope that helps, Jon > > ################################## > > WorkDir: /path/to/work/dir > > Target[catl-cpu]:1.3.6.1.4.1.9.9.109.1.1.1.1.5.1&1.3.6.1.4.1.9.9.109.1.1 > .1.1 > .3.1:[EMAIL PROTECTED] > MaxBytes[catl-cpu]: 100 > Title[catl-cpu]: Catalyst 2924 : CPU Utilization by Percentage > Options[catl-cpu]: gauge,growright > Unscaled[catl-cpu]: dmwy > YLegend[catl-cpu]: Percent of Processor Utilization > ShortLegend[catl-cpu]: Percent > Legend1[catl-cpu]: 5 min CPU Utilization > Legend2[catl-cpu]: 5 sec CPU Utilization > LegendI[catl-cpu]: 5 min CPU Utilization > LegendO[catl-cpu]: 5 sec CPU Utilization > PageTop[catl-cpu]: <H1>Catalyst Processor Utilization</H1> > <TABLE> > <TR><TD>System:</TD><TD>Catalyst 2924 Processor Utilization</TD></TR> > <TR><TD>IP:</TD><TD>123.123.123.12</TD></TR> > <TR><TD>Max:</TD> > <TD>100%</TD></TR> > </TABLE> > > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
