Corstian, If you leave out the Factor in you config and put in * 1024 at the targetline you should get the same numbers in the legend and Y-axis. (Note that you have to put white spaces around the *) If you don't want to change the target line in your config you have to use a combination of kMG, Y-Legend, ShortLegend, LegendI, LegendO, Legend1, Legend2, Legend3 and Legend4. (See: http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html#kmg and http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html#ylegend__shortlegend__legend_1234_)
Hth, Jan. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Corstian Sent: Monday, April 04, 2005 8:00 AM To: [EMAIL PROTECTED] Subject: [mrtg] Newbie - Unit in graph doesn't match unit in legend My last problem is a unit problem. I configured mrtg to use a Factor of 1024, but this factor only works on the Legends of my graphs. So, for example, my disk space in the legend is: 4295.3 MB, while the legend on de Y-axis shows 4.4MB Can anybody tell me, how I can multiply the legend on the Y-axis as well, so this will show 4.4GB instead of 4.4MB ?? Below you can find an example of my disk space section in the mrtg.conf thanks in advance! Corstian ### ### Disk space of /dev/hda1 partition on mounted on / ### Target[disk.hda1]: `/home/corstian/bin/mrtg/partition_space /dev/hda1` Options[disk.hda1]: gauge,growright,nopercent Title[disk.hda1]: Disk Usage of /dev/hda1 mounted on / MaxBytes[disk.hda1]: 10000000000 Factor[disk.hda1]: 1024 LegendO[disk.hda1]: Total LegendI[disk.hda1]: Used Legend1[disk.hda1]: Total diskspace Legend2[disk.hda1]: Used diskspace YLegend[disk.hda1]: Bytes ShortLegend[disk.hda1]: B PageTop[disk.hda1]: <H1>Disk Usage of /dev/hda1 mounted on / </H1> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi _________________________________________________________ Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen. _________________________________________________________ The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. _________________________________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
