64 bit counters are only supported on the 1000BaseT connections. They don't exist for the 100BaseT stuff.
> Thanks guys, it looks like the 32 bit counters might be the problem. > But when I try to use version 2, I get this error: > > HighspeedCounters faild ... Droping back to V1 > > So it looks like my switches might not support it (Cisco 2950) > > Any other options? Would increasing my polling time from 5 minutes to > 1 minute help? > > > On Apr 7, 2005 9:04 AM, Koelstra, J. (Jan) <[EMAIL PROTECTED]> wrote: >> >> Hi Shane, >> >> I suspect you don't use the 64-bit counters but the default 32-bit >> counters in the MRTG config file. >> See >> http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html#item_version >> for details. >> >> To change to 64-bit counters using configmaker have a look at >> http://people.ee.ethz.ch/~oetiker/webtools/mrtg/cfgmaker.html#item__2d_2dsnmp_2doptions__3a_5bport_5d_5b_3a_5btimeout >> >> Hth, >> >> Jan. > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > ---- Peter P. Benac, CCNA Emacolet Networking Services, Inc Providing Network and Systems Project Management and Installation and Web Hosting. Phone: 919-618-2557 Web: http://www.emacolet.com Need quick reliable Systems or Network Management advice visit http://www.nmsusers.org To have principles... First have courage.. With principles comes integrity!!! -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
