<resending with a different subject> Sent: Thursday, April 21, 2005 2:03 PM Subject: [mrtg] Math Functions
Hello All I'm monitoring Temperature and Humidity from an APC Device with the following Target: Target[APCEMU1_Probe1]: .1.3.6.1.4.1.318.1.1.2.1.1.0&.1.3.6.1.4.1.318.1.1.2.1.2.0:[EMAIL PROTECTED] .1.3.6.1.4.1.318.1.1.2.1.1.0 is temperature in Celsius .1.3.6.1.4.1.318.1.1.2.1.2.0 is humidity in % Is there anyway I can incorporate the function for Celsius to Fahrenheit (* 1.8 + 32) into the temperature and not humidity? I can convert it if I use Temp for In/Out, but I'd like a combined graph. Thanks, ~Todd __________________________________ Todd M. Simons Senior MIS Engineer Dell Tier 1 PA Technician Delphi Technology, Inc. New Brunswick, NJ Note: The contents of this email do not constitute a legally binding commitment. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
