Hi,
I've found a few people in the archives with the same problem but no
real answers in the archive, so I'm posting my results here for
posterity.
When using the "unscaled" option on a MRTG config file, and displaying
the data with 14all.cgi, the numbers on the "y" axis all show up as
"0.00" or "-0.00". This did not happen when using older versions of
MRTG & RRDtool.
I installed multiple versions of RRDTool, looking for where the
problem started.
14all.cgi with RRDTool 1.0.46 and earlier did not have this problem.
14all.cgi with RRDTool 1.0.47 had the problem.
I know that RRDTool has undergone many enhancements and improvements
in the last year and a half, but is there anything critical that would
prevent me from using 1.0.46?
I understand that various people recommend tools other than 14all.cgi,
but for those of us who find that 14all.cgi meets our requirements,
this is good to know. (Personally, I need a tool that will let me
give a particular MRTG.cfg as an option on the command line or URL; it
seems that all the replacements require a separate script for each cfg
file.)
==ml
--
Michael W. Lucas [EMAIL PROTECTED], [EMAIL PROTECTED]
http://www.BlackHelicopters.org/~mwlucas/
Latest book: Cisco Routers for the Desperate
http://www.CiscoRoutersForTheDesperate.com
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
