Hello, > I am getting all the time HIGH CPU LOAD. > Machine is P4 with CPU 2.04 Ghz cache 1024KB and 512MB RAM module. > Is there another way for graphing traffic using SNMP?
I have about 8000 targets and no problem. I have one main mrtg.cfg with includes. This is for faster 14all.cgi graphing. I use 20 forks for now. For bigger number of forks you need more RAM. I have 3GBs. Check your system, if use swap. I yes, this is bad and you need more RAM. My system doesn't use swap and many of RAM uses linux kernel for caches (more than 1 GB in my case). Big load can be caused by slow HDD access. I have two 15000RPM ultra320 SCSI harddisks in a mirror. Processor speed is not critical. Check older messages in mailing-list archive, for example message from Tomas Zeman with subject "Using MRTG in BIG setup" is rich for optimization informations. > Thank you in advance, > Valton best regards, Pavel Ruzicka -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
