Also a few years back, I monitored some Adtran devices, DSU/CSU. Don't remember the model, they're working fine. Do you have another tool to walk the MIB to see if your devices respond to snmp query, tool such as Openview's snmpwalk or Net-SNMP's snmpwalk (freeware)? -----Original Message----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Mon, 13 Jun 2005 13:22:07 -0500 Subject: [mrtg] Re: Monitoring ADTRAN Equipment
> I would like to know if anyone has used MRTG to monitor > adtran equipment. I > am currently using TA850 models and I would like to monitor > the bandwidth. I > get an error SNMP Error: no response received. I have the > SNMP setup on the > adtran with the correct community name. Any help would be appreciated. > A few years ago, I tried to monitor several Adtran Atlas 800 series units but never was able to get anything meaningful out of them. Apparently the traffic that passes through the interfaces does not result in the snmp counters incrementing. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi __________________________________________________________________ Switch to Netscape Internet Service. As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register Netscape. Just the Net You Need. New! Netscape Toolbar for Internet Explorer Search from anywhere on the Web and block those annoying pop-ups. Download now at http://channels.netscape.com/ns/search/install.jsp -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
