Discovered that for some reason if you configure your line to retrieve the same OID twice in the configuration
eg. Target[ezwf]: 1.3.6.1.2.1.2.2.1.14.1&1.3.6.1.2.1.2.2.1.14.1:[EMAIL PROTECTED] Then this happens and you get -1 as the response in the log file. Simply changing the 2nd OID to something else solves the problem. If anyone knows of a sensible explanation why, then please let me know. Regards, Chris. >I am trying to retrieve some DSL statistics from a DSLAM using MRTG and am >finding that a lot of the parameters retrieved are show that they failed >to resolve >to valid data. > >If I send the SMNP get from UCD-SNMP or Castlerock SNMPc, then it >responds with a valid data. (I am trying to retrieve the >adslAtucPerfDataPrev1DayInits). > >Other statistics such as line attenuation and margin are correctly >gathered. Using >Ethereal to snoop the comms, the GET pdu appears to be formatted >correctly and >only differs from those that are working by the specific OID that I want >to retrieve. >When looking at the associated RESPONSE PDU, then it shows in the decode >that STATUS is showing as GENERIC ERROR (5). When snooping the SNMPc >GET and RESPONSE, the STATUS is OK and the only difference is the one GET >in the PDU rather than the 4 GETS per PDU sent in the mrtg PDU. > >Any ideas? > >Regards, > >Chris. > >-- >Unsubscribe mailto:[EMAIL PROTECTED] >Archive http://lists.ee.ethz.ch/mrtg >FAQ http://faq.mrtg.org Homepage http://www.mrtg.org >WebAdmin http://lists.ee.ethz.ch/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
