> Questions > > Are there any particular cfgmaker flags to use for ATM sub-interfaces? >
I use the following config options... cfgmaker '--if-filter=($default && not $if_is_ciscovlan)' --snmp-options=:::::2 --ifref=descr --ifdesc=descr --global "Options[_]: growright,bits" --subdirs=HOSTNAME [EMAIL PROTECTED] ...when building configs for my 6509's. I have eight 6509's that have ATM interfaces in them. They are OC-3 port adaptors installed into flexwan (WS-X6182-2PA) blades. I am using snmpv2c counters on these targets. Here is the config for one of the subinterfaces...(this is the result of the cfgmaker command line above - I'm not using interface numbers for ifref)...Other than changing the routername and comm string via search and replace, this is exactly how it appears in my config files... Target[myrouter_ATM7_0_0.23-aal5_layer]: \ATM7/0/0.23-aal5\ layer:[EMAIL PROTECTED]:::::2 Directory[myrouter_ATM7_0_0.23-aal5_layer]: myrouter MaxBytes[myrouter_ATM7_0_0.23-aal5_layer]: 18720000 Title[myrouter_ATM7_0_0.23-aal5_layer]: ATM7/0/0.16_ATM7/0/0.23-aal5-layer PageTop[myrouter_ATM7_0_0.23-aal5_layer]: <h1>ATM7/0/0.23-aal5 layer -- myrouter</h1> > Does mrtg 'really" send all these snmp v1 polls on an atmsubif? Check with tcpdump/snoop/netmon on your server or debug snmp on the cisco. > SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System > Software > IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD, > RELEASE SOFTWARE (fc2) > I'm running IOS 12.1(22)E1. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
