Hi I am running MRTG on Redhat box and it is working very well since last more than a year.
I want to monitor Link usage of another Linux Ethernet card. But I want to monitor only incoming traffic. I don't want to monitor outgoing of that Ethernet. This linux box as two cards, My objective is to plot ( incoming traffic on Ethernet 1 - Outgoing traffic of Ethernet2 ) How can I tell Mrtg to poll onling incoming or only outgoing?? Thanks - LK Disclaimer **************************************************************************************************************************** The information contained in this e-mail, any attached files, and response threads are confidential and may be legally privileged. It is intended solely for the use of individual(s) or entity to which it is addressed and others authorised to receive it. If you are not the intended recipient, kindly notify the sender by return mail and delete this message and any attachment(s) immediately. Save as expressly permitted by the author, any disclosure, copying, distribution or taking action in reliance on the contents of the information contained in this e-mail is strictly prohibited and may be unlawful. Unless otherwise clearly stated, and related to the official business of Accelon Nigeria Limited, opinions, conclusions, and views expressed in this message are solely personal to the author. Accelon Nigeria Limited accepts no liability whatsoever for any loss, be it direct, indirect or consequential, arising from information made available in this e-mail and actions resulting there from. For more information about Accelon Nigeria Limited, please see our website at http://www.accelonafrica.com ****************************************************************************************************************************** -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
