Peter mentioned already the Option "bits". For details see http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html#options
Hth, Jan. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, October 07, 2005 4:34 PM To: [EMAIL PROTECTED] Cc: Peter Glanville Subject: [mrtg] Re: using max bytes creates percent error? OK, the complication there is that this document goes to managers who have just begun to grasp the concept that we have a 100Mb switch. :-) If I change the MaxBytes to 12500000 that will change the number at the top of the graph and though it will be technically correct, not as easy for <ahem> some people with a limited grasp to understand. Is there any way I can get a 100 at the top with the numbers correct at the bottom? Thanks for the reply! --ja On Fri, 7 Oct 2005, Peter Glanville wrote: > > Maybe I am thinking of this the wrong way but I have setup some > > unscaled > graphs in MRTG using: > > MaxBytes:1000000000 > > So that I can get a picture of how much of the pipe we are filling > > up on > our 100mega bit switch. > > I get a good graph, showing that I am filling about half, 53.2Mb/s > > but > then the percentage behind the Max is (6.7%) Where is that number > coming > from? Shouldn't it be 53%? Is there some additional setting I need to > change or am I just not reading it right? > 8 bits = 1 Byte > 100Megabits = 12,500,000 Bytes > Adjust MaxBytes accordingly. > You may want the Option "bits" too > > Peter > > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://lists.ee.ethz.ch/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://lists.ee.ethz.ch/lsg2.cgi > > -- -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi _________________________________________________________ Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen. _________________________________________________________ The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. _________________________________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
