Are you talking about a channelized T1 like a bank of PRIs or DS0s for a dial up bank or a full T1 circuit that is not "turned up" all the way?
The latter should be the same a monitoring a full 24 channel T1, just adjust MaxBytes to match your throughput. If configured properly, the former will be just as easy. Each channel will be its own interface in the rotuer/access server, and the config maker tool will detect them all. Basically, do a "show interface" on your (cisco) router, each interface listed is individually monitorable. Andrew Natalie Aloi wrote: > Does anyone know of a way to map individual channels from a t1 through > MRTG? > > CONFIDENTIALITY NOTICE: This message and any attached documents may contain > confidential information from Synergy One FCU. > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://lists.ee.ethz.ch/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://lists.ee.ethz.ch/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
