OK... before I get any well deserved "RTFM"s.... I did and found the answer:
Options[_]: growright, bits Thank you to those who would have responded, had I not have found this. :-) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Smith, H.Michael Sent: Saturday, November 19, 2005 11:20 PM To: [EMAIL PROTECTED] Subject: [mrtg] Unit Scale Incorrect for Juniper rtr interfaces I'm running mrtg-2.9.16 on windows, monitoring three interfaces on a Juniper m7i JUNOS 6.2. The utilization reported by mrtg is incorrect. It some cases, it appears to be ~1/10 the actual utilization. (i.e. show int reports ~27Mbps and mrtg reports ~2.7Mbps) In other cases, the discrepancy is not so neat. The numbers reported by mrtg are always significantly less than they should be. Has anyone seen this / is aware of a resolution? Thanks, Michael -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
