MRTG only detects certain things automatically, specifically traffic going over interfaces. You're going to have to look up the MIBs you need yourself and set them up in your .cfg file yourself. The examples already include an example of CPU utilization.
Allan Cleaveland -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charley Morgan Sent: Tuesday, November 29, 2005 8:33 AM To: [EMAIL PROTECTED] Subject: [mrtg] problem with snmp on windows 2000 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I just installed the SNMP service on a Windows 2000 server and have set my communities and everything. However, when I use cfgmaker, or any other polling software, I am only seeing 2 interfaces. What do I need to do to be able to see the processor utilization, memory stats, etc? I think I am missing something and I can't figure out why? Thanks for any info, ______________________________________________________ Charley Morgan Internet Engineer Megagate Broadband <blocked::http://www.megagate.com/> ' Tel: (601) 450-5000 * Email: [EMAIL PROTECTED] <blocked::mailto:[EMAIL PROTECTED]> ______________________________________________________ -- Attached file removed by Ecartis and put at URL below -- -- Type: image/gif -- Size: 2k (2725 bytes) -- URL : http://lists.ee.ethz.ch/p/54-logo.gif -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
