On Mon, 2005-12-19 at 21:31 -0500, Wixted, Joe wrote: > I'm trying to get one of these integrated with my MRTG/rrd/routers2.cgi > setup. > > > The problem is, my graphs don't match the results I see from the device, > or from GetIf. The LAN monitor seems to work fine, but the Humidity and > Water sensors are way off. Humidity from the device reports ~15%, from > MRTG, it reports 104%. For the Water Sensor, the device reports 99, but > MRTG reports 792. Anyone have any suggestions? don't use options 'bits', just guage.
Upgrade the Goose to 2.48 - that version seems to work the best. 2.46, in particular has lots of troubles. If you have trouble upgrading, get in touch with Pepe at IT Watchdogs - he's very helpful. I'll upload my most recent version of a working template file to http://www.austinnetworkdesign.com/mrtg/probe.template The template auto-detects probes from UptimeDevices and ITwatchdogs and creates a working configuration. I have a raft of templates there for various devices, including IOS snmp V3 support when using the MRTG 2.13 release candidate -- Daniel J McDonald, CCIE # 2495, CNX, CISSP # 78281 Austin Energy [EMAIL PROTECTED] gpg Key: http://austinnetworkdesign.com/pgp.key Key fingerprint = B527 F53D 0C8C D38B DCC7 901D 2F19 A13A 22E8 A76A -- Attached file removed by Ecartis and put at URL below -- -- Type: application/pgp-signature -- Desc: This is a digitally signed message part -- Size: 190 bytes -- URL : http://lists.ee.ethz.ch/p/43A801A610289-signature.asc -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
