Hi, I know about 64bit counters for data (ifHCInOctetsm ifHCOutOctets), I use them every day, but I don't know about counter with "bandwidth" information, which is normally IF-MIB::ifSpeed. But this counter is 32bit and it has maximum capacity 4295.0 Mbits/s, which is not enough for 10Gbps interfaces. I look for 64bit variant of this OID. I can't specify MAX speed manually, because I use autogenerated configs with cfgmaker.
Best regards, Pavel Ruzicka > 64bit counters do exist on most routers. To use them within MRTG you have > to add :::::2 behind the IP-adress. See > http://people.ee.ethz.ch/~oetiker/webtools/mrtg/cfgmaker.html and > We have Cisco router with 10Gbps interface and we have > wrong MAX SPEED 4295.0 Mbits/s. > I discovered, that this is probably overflowed 32bit counter: > IF-MIB::ifSpeed.19 = Gauge32: 4294967295 -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
