Hi, I'm having problems getting MRTG to work properly with our firewall. cfgmaker queries it and sets it up no problem, but when MRTG is run it shows no data going through any of the three ports, the graphs are all blank. I know MRTG is ok because it graphs the traffic going through our managed switchs fine. The firewall is a 3Com superstack 3, I've set all SNMP traffic to be allowed through on all ports and have configured all the SNMP settings I can find: get community name, system name, system contact, system location and host 1 This is our main firewall with constant traffic going through it, so im sure the graphs shouldnt be blank. The log files show all zeros. e.g. the log file 192.168.1.1_3.log starts with:- 1140607329 0 0 1140607329 0 0 0 0 1140606636 0 0 0 0 and continues with zeros all the way down, the other log files are the same. I've attached my mrtg.cfg Im currently running MRTG manually with 'env LANG=C ./mrtg /usr/local/mrtg-2/cfg/mrtg.cfg' and its running without any errors, and is properly updating the graphs, ie the timeline is moving, but the graphs are empty. Please if you tell me to RTFM, tell me which one to read, because Ive read the main one and several others.
Thanks very much for any help! -- Attached file removed by Ecartis and put at URL below -- -- Type: text/plain -- Size: 4k (4457 bytes) -- URL : http://lists.ee.ethz.ch/p/18-mrtg.cfg -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
