It sounds to me like setting MaxBytes to 16000, AbsMax to a higher value (i.e. the highest value you wish to record) and changing the graphs to UnScaled would achieve what you want.
Regards, Scott. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rajendra Adhikari Sent: 04 April 2006 11:36 To: [EMAIL PROTECTED] Subject: [mrtg] Re: Chop MRTG graph Hi, I have one prfoblem about recording the values by mrtg. I have set MaxBytes: 8000 and, AbsMax: 16000 I understand that whenever the traffic is above the 16000 then mrtg records the zero value unless the traffic is below AbsMax. I need something that the value does not get recorded to zero but chop off at AbsMax so that I could see the constant AbsMax value in the graph whenever the value is equal or above AbsMax. .i.e. the vlaue shall be chopped at the AbsMax. I will appreciate your suggestions. Best Regds, Rajendra Adhikari -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
