We have been using MRTG for over 2 years to monitor our network bandwidth consumption across our core and remote sites. The server that we had been running on (Mac Xserve with ver. 10.2 OS X) developed and issue and we had to rebuild the hard drive. Now I have installed MRTG again using the version 2.14.1. When I run configmaker and use my old config maker script, it seems to generate a config, but when I try to run MRTG to get the graphs, I get the following error messages: Tuesday, 30 May 2006 at 16:57: WARNING: rateup died from Signal 5 with Exit Value 0 when doing router 'r_columbiaroad.breakthru.net_3' Signal was 5, Returncode was 0 dyld: Symbol not found: _jpeg_resync_to_restart Referenced from: /usr/local/lib/libgd.2.dylib Expected in: flat namespace
Tuesday, 30 May 2006 at 16:57: ERROR: Skipping webupdates because rateup did not return anything sensible Tuesday, 30 May 2006 at 16:57: WARNING: rateup died from Signal 5 with Exit Value 0 when doing router 'r_columbiaroad.breakthru.net_4' Signal was 5, Returncode was 0 dyld: Symbol not found: _jpeg_resync_to_restart Referenced from: /usr/local/lib/libgd.2.dylib Expected in: flat namespace Tuesday, 30 May 2006 at 16:57: ERROR: Skipping webupdates because rateup did not return anything sensible Tuesday, 30 May 2006 at 16:57: WARNING: rateup died from Signal 5 with Exit Value 0 when doing router 'r_columbiaroad.breakthru.net_6' Signal was 5, Returncode was 0 Does any one know how to interpret these messages and what I need to do to resolve? Thanks Neal -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
