I have config files for memory utilization on two machines: [EMAIL PROTECTED] etc]# cat obrien-mem.conf Target[obrien-mem]: 1.3.6.1.2.1.25.2.3.1.6.2&1.3.6.1.2.1.25.2.3.1.6.2:[EMAIL PROTECTED]: routers.cgi*Options[obrien-mem]: scaled Options[obrien-mem]: growright, gauge MaxBytes[obrien-mem]: 5126848 Title[obrien-mem]: Memory Utilization for obrien.impactengine.com (presentationengine.com) PageTop[obrien-mem]: <H1>Memory Utilization for obrien.impactengine.com (presentationengine.com)</H1> YLegend[obrien-mem]: # Gigabytes in use ShortLegend[obrien-mem]: GB Colours[obrien-mem]: YELLOW#F9C000,RED#F90000,DARK GREEN#006600,VIOLET#FF00FF Legend1[obrien-mem]: GB LegendI[obrien-mem]: GB: LegendO[obrien-mem]: [EMAIL PROTECTED] etc]# cat riker-mem.conf Target[riker-mem]: 1.3.6.1.2.1.25.2.3.1.6.2&1.3.6.1.2.1.25.2.3.1.6.2:[EMAIL PROTECTED]: routers.cgi*Options[riker-mem]: scaled Options[riker-mem]: growright, gauge MaxBytes[riker-mem]: 5126848 Title[riker-mem]: Memory Utilization for riker.impactengine.com (flashadengine.com) PageTop[riker-mem]: <H1>Memory Utilization for riker.impactengine.com (flashadengine.com)</H1> YLegend[riker-mem]: # Gigabytes in use ShortLegend[riker-mem]: GB Colours[riker-mem]: YELLOW#F9C000,RED#F90000,DARK GREEN#006600,VIOLET#FF00FF Legend1[riker-mem]: GB LegendI[riker-mem]: GB: LegendO[riker-mem]:
The graph for "obrien" displays the way I want... the top of the graph always reads 5GB and the graph is drawn under it. But the graph for "riker" is always unscaled... the top of the graph changes according to the highest reading shown. I'm stumped! -- *********************************************************************** * John Oliver http://www.john-oliver.net/ * * * *********************************************************************** -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
