Hi members, I have a problem in plotting a graph doing the target arithmetic. Let me explain the situation: I have 4 switch ports. Say, Por1 to Port 4. Port 1 to port 4 are on a single vlanA. Port 1 is also tagged with vlanB. My manageable switch doesn't have any OID or other way to determine the traffic based on vlan. So, I have to do a simple arithmetic. The traffic from each port goes to other ports. My intention is to plot the graph at Port 1 only the traffic that were for vlanB. I did as: Target[switch]: 1:[EMAIL PROTECTED] - -2:[EMAIL PROTECTED] - -3:[EMAIL PROTECTED] - -4:[EMAIL PROTECTED] : But, I doubt on this definition. Out at 1 for VlanA would be to 2, 3 and 4, and similarly In at 1 for vlanA would be from 1,2 &3. What if there is a traffic between 2,3 and 4. Doesn't these traffic effect the above definition.
Or is there other way to do? Please suggest. I will appreciate your help. thanks, Rajendra Adhikari. -- --------------------- [ SECURITY NOTICE ] --------------------- To: [EMAIL PROTECTED] For your security, [EMAIL PROTECTED] digitally signed this message on 18 June 2006 at 10:14:20 UTC. Verify this digital signature at http://www.ciphire.com/verify. ---------------- [ CIPHIRE DIGITAL SIGNATURE ] ---------------- Q2lwaGlyZSBTaWcuAjhtcnRnQGxpc3QuZWUuZXRoei5jaAByYWplbmRyYUBzdWJp c3UubmV0Lm5wAGVtYWlsIGJvZHkA9QIAAHwAfAAAAAEAAAB8J5VE9QIAAPACAAIA AgACACB7jXBHgv5tdxZ1OEpqbcUQfCYT+qfWlhOykR+6NW6T7QEAdxbfhtK8XxGg HXlqYiO/ff1X5loasS/aYb3a/529jxFrnklBEVoKh1NMc01gALjzoNgld3inTs1w /U0m+z8tx4vRuCesU2lnRW5k ------------------ [ END DIGITAL SIGNATURE ] ------------------ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
