Thanks, that was it exactly.
Chandler Bing
"William Owen"
<[EMAIL PROTECTED]
filesmail.com> To
<[EMAIL PROTECTED]>
07/19/2006 08:53 cc
AM
Subject
RE: [mrtg] Correct Bandwidth
Utilization
I think you are having a bits/bytes issue.
80kB = 640kb
1.536Mb * 45% = 0.6912Mb = 675kb
Try adding "Options[<Insert Target Here>]: bits" to the config for the
interface in question.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, July 19, 2006 10:17 AM
To: [EMAIL PROTECTED]
Subject: [mrtg] Correct Bandwidth Utilization
Hi all,
We have several WAN connections and MRTG reports one of my WAN
connections
with spikes that show no more than 80k utilization out of 768k pipe.
Our
parent company monitors it with Concord and while their graph shows %,
it
assumes 1.536Mbs max rate and shows spikes at 45%. Now this seems to
disagree with my graphs. SBC has similar reports that agree with our
parent. How can I trust the other graphs on the other connections?
Could
it be that MRTG is not giving me accurate graphs? Is there something I
should look at or a way I can troubleshoot this. I'm at a complete
loss.
Thanks.
Chandler Bing
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
