I wanted to follow up to this since I've received a few e-mails and phone calls recently regarding others who are not able to produce configs using SNMPv3 and cfgmaker.
I haven't been able to get this to work yet, and it appears that others are having the same problem. Here's all the trial and error I've been through with regards to this: Using MRTG-2.14.7 and other 2.14 versions: ./cfgmaker --username="MRTG" 10.32.254.2:::::3 SNMP V3 requires a --username parameter as part of the User Security Model for router [EMAIL PROTECTED]:::::3 at ./cfgmaker line 121. Using MRTG-2.13.2 and other 2.13 versions (Daniel McDonald reported getting cfgmaker to work using version mrtg-2.13.2-0.1.102mdk): ./cfgmaker --username="MRTG" 10.32.254.2:::::3 Undefined subroutine &main::snmpmapOID called at ./cfgmaker line 1480. This is both on Windows and Linux systems. I have used the entire command line before as shown in the previous e-mail below and still have problems. I was wondering if others have had success implementing a new configuration using cfgmaker under MRTG 2.14? I am still able to query the specific OIDs using snmpget and snmpwalk. So, anyone have any thoughts? Anyone have success reported using any of the existing stable releases? Thanks! Brian Lamerson Network Specialist Stanislaus County Office of Education (209) 525-5018 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lamerson, Brian Sent: Tuesday, July 25, 2006 5:20 PM To: [email protected] Subject: [mrtg] SNMPv3 & MRTG cfgmaker Hello all. I am attempting to get SNMPv3 to run on our Cisco equipment and work with MRTG. So far I have SNMPv3 working perfectly on the Cisco equipment. I applied the following to get it to work: snmp-server group MRTG v3 priv snmp-server user MRTG MRTG v3 auth md5 authpassword priv des privpassword I can in turn query it using: snmpget -v 3 -a md5 -u MRTG -x des -A authpassword -X privpassword -l authpriv <routerip> 1.3.6.1.2.1.1.3.0 Everytime, it returns the uptime. However, when I try to use MRTG with it, I receive the following: perl cfgmaker --global "EnableSnmpV3: yes" --snmp-options=:::::3 --username MRTG --authpassword authpassword --privpassword privpassword <routerip> SNMP V3 requires a --username parameter as part of the User Security Model for router 10.32.254.2:::::3 at cfgmaker line 121. I've tried moving the location of -username, I've tried adding -username=MRTG, I've tried -username="MRTG" (Windows box). I've basically tried all different iterations of it. Is this a bug with the cfgmaker program or is it highly picky about something I'm doing? Obviously SNMPv3 is working on the device from the snmpget command, just I cannot get the syntax for the cfgmaker command. While we are a Windows shop, I have tried running cfgmaker both from a Windows machine and a Linux machine with the same results. I'm using MRTG version 2.14.5. Thanks in advance!! Brian Lamerson Network Specialist Stanislaus County Office of Education (209) 525-5018 -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
