Here's a cfg file for my ATM as an example, best bet is to get accustomed to config maker. 400 interfaces will not overwhelm if it is dedicated. I am running several thousand on a virtual server.
Thanks, Jason -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Green dfn Systems Sent: Thursday, December 14, 2006 5:35 PM To: [email protected] Subject: [mrtg] Setup advice for ATM PVCs Let me start by saying I'm new to MRTG. I have managed to get a basic working setup on a Win2000 server, and have been monitoring (lurking) this mailing list to try to learn for a few weeks. My goal is to graph usage on a Cisco Router of about 400 ATM PVCs on a multiport sub-interface. I have working graphs on the ethernet interfaces, and sub-interface totals, but have not been able to configure a cfg file to graph individual PVCs. Is there a place where I might be able to see examples of cfg files, or better yet, has someone on this list done this? Also, will 400 interfaces overwhelm my PIII server? Bill Green dfn Systems -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Attached file removed by Ecartis and put at URL below -- -- Type: application/octet-stream -- Desc: 10.156.4.10.cfg -- Size: 310k (317532 bytes) -- URL : http://lists.ee.ethz.ch/p/10.156.4.10.cfg -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
