John, The only difference I see -beside a different maxbytes setting- is the target line which is split in 2 for the Fa0/1 interface. These two parts should be on 1 line. To do some more troubleshooting you could have a look in the logfile which is created after starting mrtg with the '--logging=<some file name>' option
HTH, Jan. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John M. Krumenacker Sent: Friday, January 12, 2007 3:38 AM To: MRTG Mailing List Subject: [mrtg] Re: Cisco 2916 no values reporting it's all private so this is the actual config: ### Interface 1 >> Descr: 'VLAN1' | Name: 'VL1' | Ip: '192.168.1.10' | Eth: '00-90-b1-ae-78-80' ### Target[192.168.1.10_VLAN1]: \VLAN1:[EMAIL PROTECTED]: SetEnv[192.168.1.10_VLAN1]: MRTG_INT_IP="192.168.1.10" MRTG_INT_DESCR="VLAN1" MaxBytes[192.168.1.10_VLAN1]: 1250000 Title[192.168.1.10_VLAN1]: VLAN1 PageTop[192.168.1.10_VLAN1]: <h1>VLAN1</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>bplnoc2916 in </td> </tr> <tr> <td>Maintainer:</td> <td></td> </tr> <tr> <td>Description:</td> <td>VLAN1 VLAN1 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>VL1</td> </tr> <tr> <td>Max Speed:</td> <td>1250.0 kBytes/s</td> </tr> <tr> <td>Ip:</td> <td>192.168.1.10 ()</td> </tr> </table> </div> ### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' | Eth: '00-90-b1-ae-78-81' ### Target[192.168.1.10_FastEthernet0_1]: \FastEthernet0/1:[EMAIL PROTECTED]: SetEnv[192.168.1.10_FastEthernet0_1]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet0/1" MaxBytes[192.168.1.10_FastEthernet0_1]: 12500000 Title[192.168.1.10_FastEthernet0_1]: FastEthernet0/1 -- bplnoc2916 PageTop[192.168.1.10_FastEthernet0_1]: <h1>FastEthernet0/1 -- bplnoc2916</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>bplnoc2916 in </td> </tr> <tr> <td>Maintainer:</td> <td></td> </tr> <tr> <td>Description:</td> <td>FastEthernet0/1 UpLink to CableModem RTR </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>Fa0/1</td> </tr> <tr> <td>Max Speed:</td> <td>12.5 MBytes/s</td> </tr> </table> </div> On Thu, 2007-01-11 at 20:29 -0600, MrPaul wrote: > Can you post the MRTG config for one of your interfaces (changing the > IP and snmp community in the target field would be wise). Paul > > On 1/11/07, John M. Krumenacker <[EMAIL PROTECTED]> wrote: > Hello All, > > I have configured a 2916 in MRTG (ver 2.15.0). > > I see the interface traffic updating on vlan1 only - but all > the other > interfaces (all 16 are active) show exactly 35 b/s for the > last 6 hours > (since I configured it). > > On the 2916 I enabled RO SNMP and nothing else. Didn't feel i > needed to. > 15 ports are all auto - one is set to port monitor fa0/1. > Nothing > special about this config. > > Can anyone enlighten me please? > > Thanks > > John > > -- > Unsubscribe > mailto:[EMAIL PROTECTED] > Archive http://lists.ee.ethz.ch/mrtg > FAQ http://faq.mrtg.org Homepage > http://www.mrtg.org > WebAdmin http://lists.ee.ethz.ch/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi _________________________________________________________ Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten. _________________________________________________________ This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The state accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages. _________________________________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
