I made these suggested changes, see config below, but I don't see any changes on the graphs. [EMAIL PROTECTED] ~]# cat /etc/mrtg/Liebert_KVA.cfg
EnableIPv6: no WorkDir: /usr/local/rrd_data LibAdd: /usr/local/rrdtool/lib/perl/ Options[_]:growright LogFormat: rrdtool PathAdd: /usr/local/rrdtool/bin/ routers.cgi*Options[_]: unscaled # Liebert North UPS KVA Graphs for aa.bbb.ccc.17 Target[Liebert_17_T]: 1.3.6.1.4.1.476.1.1.1.1.4.5.0&1.3.6.1.4.1.476.1.1.1.1.4.5.0:[EMAIL PROTECTED] bb.ccc.17 MaxBytes[liebert_17_T]: 120000 Options[Liebert_17_T]: gauge,nopercent,growright,nobanner Unscaled[Liebert_17_T]: dwmy Title[Liebert_17_T]: KVA Utilization report for Liebert North_3 aa.bbb.ccc.17 PageTop[Liebert_17_T]: <H1> Liebert KVA Analysis -- aa.bbb.ccc.17</H1> routers.cgi*LowerLimit[Liebert_17_T]: 70 routers.cgi*UpperLimit[Liebert_17_T]: 100 routers.cgi*Mode[Liebert_17_T]: generic # Liebert South UPS KVA Graphs for aa.bbb.ccc.16 Target[Liebert_16_T]: 1.3.6.1.4.1.476.1.1.1.1.4.5.0&1.3.6.1.4.1.476.1.1.1.1.4.5.0:[EMAIL PROTECTED] bb.ccc.16 MaxBytes[liebert_16_T]: 120000 Options[Liebert_16_T]: gauge,nopercent,growright,nobanner Unscaled[Liebert_16_T]: dwmy Title[Liebert_16_T]: KVA Utilization report for Liebert South_3 aa.bbb.ccc.16 PageTop[Liebert_16_T]: <H1> Liebert KVA Analysis -- aa.bbb.ccc.16</H1> routers.cgi*LowerLimit[Liebert_16_T]: 70 routers.cgi*UpperLimit[Liebert_16_T]: 100 routers.cgi*Mode[Liebert_16_T]: generic ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Shipway Sent: Tuesday, February 27, 2007 3:16 PM To: Chauncey, Jeffrey; [email protected] Subject: Re: [mrtg] Minimum Y-Axis If you are using routers2 as your frontend, take a look at routers.cgi*LowerLimit[xxxx]: 250 routers.cgi*UpperLimit[xxxx]: 300 routers.cgi*Options[xxxx]: rigid This will produce the output you are after. Omit the 'rigid' option to allow the axis to extend if necessary to fit the data. Steve -- Steve Shipway ITSS, University of Auckland (09) 3737 599 x 86487 [EMAIL PROTECTED] ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chauncey, Jeffrey Sent: Wednesday, 28 February 2007 4:50 a.m. To: [email protected] Subject: [mrtg] Minimum Y-Axis Sorry if this question has been answered, I am looking for a way to scale my minimum Y-Axis. For example, I am monitoring input voltage which averages around 280, but never falls below 250. I would like my Y-Axis to be 250-300, so I can clearly see the peaks and valleys. Thanks in advance. CONFIDENTIAL NOTICE: This e-mail message and any attachment(s) (collectively, this 'Email') are intended only for the confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient named above or an agent responsible for delivering it to the intended recipient named above, you have received this Email in error. Please notify the sender immediately and permanently delete this Email and any copies thereof.
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
