I've been running MRTG on two separate systems with each running the config files for systems that were local to their network. Yesterday, I moved everything to a single system and all device RRD files are being updated as they should except for one set of files. Regardless of what I do, the RRD files will no be updated by MRTG. MRTG is running and is no giving any system errors, and running any of the configuration files by themselves (non daemon) does not produce any errors either.
All of the systems are being updated via a DS3 WAN connection that runs at about 10mbps (plenty of room left) and two of the devices in question are Catalyst 6513s with more than 200 interfaces each. If I remove the RRD files, MRTG will create new ones; however, after their initial creation, the RRD files never get updated. All other devices, including other devices being updated over the same DS3 are being updated correctly. System Information Mandrake Linux (kernel 2.4.22-10mdk) MRTG, v2.15.0 RRDTool, v1.2.11 Frontend: routers.cgi, v2.16 Thanks, in advance! Mike _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
