Stuart,
The timestamps of the first lines in the two logfiles are 36786 seconds apart.
In a 5 minute run cycle they should be (about) 300 seconds apart.
First you should find an explanation for this big time gap.
If the 10+ hour timegap is right then it is normal that there are zero's in the
graphs:
The first counter increases only by 1922. This results in a rate of less then 1
per second, and will give a 0 in your log and graph. The second counter
increases even less.
To graph such a slow increasing counter you probably need the perminute or
perhour option.
HTH,
Jan.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stuart
Marsden
Sent: Friday, March 09, 2007 9:49 AM
Cc: [email protected]
Subject: Re: [mrtg] Graphs from 1 server, but not 3 identical servers
Hi Alex
Thanks for your patience.
> > Rateup is working for thousands, if not millions, of users.
> > Excuse me for not believing you right away.
Sorry - What I meant was that the secret to what I am doing wrong is
within Rateup,
I have loads of other graphs which work fine
> > MaxBytes or, if you need two different rates, MaxBytes1 and
MaxBytes2.
> > Not that I think this is a problem
I have gone back to my original of just MaxBytes
> > Please don't make me debug logfiles. Show the top line of one (not
more)
> > of the non-functional setups, for a couple of consecutive updates.
These are two consecutive runs on my test server to isolate this problem
(Normally run on 5 min cron )
1173392418 170961 269
1173392418 0 0 0 0
1173390174 0 0 0 0
1173390000 0 0 0 0
1173429204 172883 274
1173429204 0 0 0 0
1173392418 0 0 0 0
Stuart
_________________________________________________________
Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet
de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u
verzocht dat aan de afzender te melden en het bericht te verwijderen. De staat
aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband
houdt met risico's verbonden aan het elektronisch verzenden van berichten.
_________________________________________________________
This message may contain information that is not intended for you. If you are
not the addressee or if this message was sent to you by mistake, you are
requested to inform the sender and delete the message. The state accepts no
liability for damage of any kind resulting from the risks inherent in the
electronic transmission of messages.
________________________________________________________________________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
