I had been using MRTG 2.13.2 (RRDTool 1.0.50)with no problem but when we built a new machine with RH Enterprise 4 it installs 2.10.15 and suddenly all my Thresholds stopped working. We installed 2.14.5 on my test machine and Threshold started working. I had not even looked at the version of RRDTool, I am using 1.2.15 on both boxes. I got the same "No valid current data" message but when I dumped the rrd file I had numbers that looked right.
Duane Perry University of Missouri -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tuc at T-B-O-H.NET Sent: Saturday, April 14, 2007 10:03 PM To: [email protected] Subject: [mrtg] MRTG 2.10.15 and RRDTool 1.2.18 Hi, About 2 years ago I posted that I was having some problems with the : WARNING: can't do threshold checking for target XXX-net(i) -- No valid current data and at the time the 1.2.X wasn't compatible with the version of MRTG at the time. A rrdtool dump of the file showed it as all unknown. I recently had to install MRTG/RRDTool on a system and using RPMs in the yum system from the repositories I had it installed MRTG 2.10.15 and RRDTool 1.2.18. I'm getting the errors. Is MRTG still not able to use RRDTool 1.2.X, or is there some other reason causing it this time? If I switch back to writing to .log , the file has data. Thanks, Tuc _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
