HI, I am using cisco devices.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alex van den Bogaerdt Sent: Wednesday, May 23, 2007 6:37 PM To: [email protected] Subject: Re: [mrtg] MRTG: BroadCast & Unicast Monitoring On Wed, May 23, 2007 at 05:10:33PM +0530, Yogesh Suryawanshi wrote: > HI All, > > > > Is it possible to monitor network broadcast, unicast & unknown unicast > in Layer 2 switched LAN Using MRTG. That depends... If your equipment supports it, yes, it can be done. > Please guide how it can be done. Contact your vendor. Ask them if, and how, you can get statistics for these counters. Then process like any other counter. Alex _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg Disclaimer: ----------------------------------------------------------------- This email and any files transmitted with it may be confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. The recipient should check this email and any attachments for the presence of viruses and the company accepts no liability for any damage caused by the same. Please note that any views or opinions presented in this email are those of the author and do not necessarily represent those of WNS Group. ----------------------------------------------------------------- _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
