Hello, I am very new to mrtg. I would like to use it to monitor system load. To that end I installed mrtg 2.15.2 on a FreeBSD system (I used ports for that).
I started mrtg from /usr/local/etc/rc.d/ in a daemon mode. My config has the following entries: WorkDir: /usr/local/www/stats/mrtg Options[_]: growright,bits Target[cpu]: `/usr/local/etc/mrtg/load.pl 1 0` Options[cpu]: gauge, growright, nopercent MaxBytes[cpu]: 100 WithPeak[cpu]: ymwd Title[cpu]: Analysis of CPU load averages PageTop[cpu]: <H1>CPU Load Averages</H1> ShortLegend[cpu]: % YLegend[cpu]: % of Load Legend1[cpu]: . Legend2[cpu]: % of Load Legend3[cpu]: . Legend4[cpu]: Peak % of Load LegendI[cpu]: Maximum: LegendO[cpu]: Loaded: Load.pl is in /usr/local/etc/mrtg/ ps ax |grep mrtg 6858 ?? Is 0:01.00 /usr/local/bin/perl -w /usr/local/bin/mrtg --pid-file /var/run/mrtg/mrtg.pid --lock-file /var/run/mrtg/lockfile However, nothing gets written to /usr/local/www/stats/mrtg/ Can I count on any suggestion what to check and how to get the load monitoring started? Thank you very much in advance! I am not too technical person so please bear with me! Warm regards, Zbigniew Szalbot _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
