Hi Dan Thanks a lot for this fast response. Yep, this does the job! I had a former version installed (2.10.15) and had to compile the newest version.
best regards Bruce - -----Original Message----- - From: Dan [mailto:[EMAIL PROTECTED] - Sent: Saturday, September 15, 2007 5:51 PM - To: [EMAIL PROTECTED] - Cc: [email protected] - Subject: Re: [mrtg] Graphs with offset or predefined range - - [EMAIL PROTECTED] wrote: - - > I am monitoring some temperatur sensors in our serverroom. - > That works perfect and I get the graphs I expect. - > But different as monitoring the temperature outside a - building the temperature inside an air-conditioned room has - only a small - > hysteresis and most of the graph range is "unused". - > - > Example: the room temperature is between 19 °C and 21 °C. - The graph is beginning on the bottom with 0 and scales up to - 28 °C. So the - > drawed line is quite flat. - > - > Is there any way to set an "offset" for the graph that the - range is e.g. between 15 and 30? (so the Graph starts at 15 - °C not at 0 - > °C) - - See Docs: http://oss.oetiker.ch/mrtg/doc/mrtg-reference.en.html - Section: Options - Option: expscale - - That should make it more visible, either that or choose 'unscaled'. - - Dan. - _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
