Daniel, Thank you very much for your response.
Device, I have problems monitoring with MRTG, is ASA 5510. Cisco Adaptive Security Appliance Software Version 7.2(2) MRTG v 2.15.2 ASA is configured in regular firewall mode. No "PIX on a stick". Config contains very few inbound and outbound rules one site-to-site VPN tunnel, VPN for client remote connectivity and this firewall is not heavily utilized. I run MRTG against another ASA but 5550 model (same code level as problematic 5510) and I don't have any problems monitoring the traffic like I have with 5510. I also monitor traffic on multiple PIX 525s with code 6.3.5 and don't have any problems either. Let me know if you need to know more details. Again, I appreciate your response and any support you can provide in this matter. ===================== Chris Miroslaw IT Specialist 26 Ardsley Sq Parlin, NJ 08859 Cell: 917-833-8697 Home: 732-952-8612 ===================== -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel J McDonald Sent: Thursday, October 04, 2007 8:27 AM To: [email protected] Subject: Re: [mrtg] Inbound and outbound values are identical On Wed, 2007-10-03 at 23:49 -0400, Chris Miroslaw wrote: > Hello, > > > > This is the third time I am sending this e-mail out. I apologize for > spamming but could someone please respond to it with any answer? Perhaps if you told us what version of code you were running (on either the ASA or MRTG), or if you posted a sanitized mrtg config, we might have more insight for you. I don't have any ASA in production, but my 9 FWSM and many PIX all report traffic appropriately. > Does anyone have issues with MRTG and an ASA appliance? MRTG keeps > reporting inbound and outbound values as being identical. Is your topology "pix on a stick?" > I saw a couple posts regarding some SNMP changes with ASAs and was > curious to see if anyone else had seen this. I can't find a straight > answer. In the release notes I have read, there were some mib additions in the 8.0.x train - I think the entity mib just got added, but going from memory here - but no indications that existing mibs were changed at all. -- Daniel J McDonald, CCIE # 2495, CISSP # 78281, CNX Austin Energy http://www.austinenergy.com _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
