Tnx Paul,
a question... it's the same to insert: [EMAIL PROTECTED]: :::::2 (one ": " and a space and then ":::::2") or [EMAIL PROTECTED]:::::2 (only ":::::2") From: MrPaul [mailto:[EMAIL PROTECTED] Sent: giovedì, 8. novembre 2007 08:59 To: Gabriele Moroni Cc: [email protected] Subject: Re: [mrtg] MRTG and Gigabit You need to enable 64 bit counters. Target[aaaaaa]: 25:[EMAIL PROTECTED]: ::::2 Paul On 11/8/07, Gabriele Moroni <[EMAIL PROTECTED]> wrote: Hi all, I have a strange problem... I generete a traffic with bwtest beetwen two windows server 2003 with gigabit port The amount of traffic is 580 Mbit/s The switches beetwen the to servers are Cisco 3750 and 2960 with fiber 1gb/s connections. The graph generated after 35 minutes is always at max 70mbit/s... maybe an error on the configuration of mrtg ? Target[aaaaaa]: 25:[EMAIL PROTECTED]: SetEnv[aaaaaa]: MRTG_INT_IP="" MRTG_INT_DESCR="GigabitEthernet1/0/25" Options[aaaaaa]: bits,growright MaxBytes[aaaaaa]: 125000000 Title[aaaaaa]: Traffic Analysis for 25 PageTop[aaaaaa]: <h1>Traffic Analysis for 25 </h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>3750 </td> </tr> <tr> <td>Maintainer:</td> <td></td> </tr> <tr> <td>Description:</td> <td>GigabitEthernet1/0/25 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>Gi1/0/25</td> </tr> <tr> <td>Max Speed:</td> <td> 125.0 MBytes/s</td> </tr> </table> </div> Ideas ? Tnx Bye Gabriele _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
