I tried it both with and without the growright option in the cfg file with no change. I would like it to grow to the right, i.e the little red arrow on the right side of the graph. I have included the cfg file that it is using. As I said, i have tried it with and without the growright option. _____________________________________________________________________________________________________ # Created by # ./cfgmaker --global 'WorkDir: /home/mrtg/CCU/paxtonccu101/' --global 'Options[_]: growright' --global 'Options[_]: integer' --global 'Options[_]: unknaszero' --global 'Options[_]: nopercent' --community=IlliComNet --snmp-options=::1:1::1 --output=/usr/local/mrtg-2/bin/paxtonccu101.cfg 10.0.11.2
RunAsDaemon: Yes Interval: 5 ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits WorkDir: /home/mrtg/CCU/paxtonccu101/ Options[_]: growright Options[_]: integer Options[_]: unknaszero Options[_]: nopercent ###################################################################### # System: LMS3000 # Description: LMS3000 # Contact: [EMAIL PROTECTED] # Location: Paxton Tower CCU101 ###################################################################### ### Interface 1 >> Descr: 'lo0' | Name: '' | Ip: '127.0.0.1' | Eth: '' ### ### The following interface is commented out because: ### * it is a Software Loopback interface ### * has a speed of 0 which makes no sense # # Target[10.0.11.2_1]: 1:[EMAIL PROTECTED]::1:1::1 # SetEnv[10.0.11.2_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo0" # MaxBytes[10.0.11.2_1]: 0 # Title[10.0.11.2_1]: Traffic Analysis for 1 -- LMS3000 # PageTop[10.0.11.2_1]: <H1>Traffic Analysis for 1 -- LMS3000</H1> # <TABLE> # <TR><TD>System:</TD> <TD>LMS3000 in Paxton Tower CCU101</TD></TR> # <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> # <TR><TD>Description:</TD><TD>lo0 </TD></TR> # <TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR> # <TR><TD>ifName:</TD> <TD></TD></TR> # <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR> # <TR><TD>Ip:</TD> <TD>127.0.0.1 (localhost.localdomain)</TD></TR> # </TABLE> ### Interface 2 >> Descr: 'esmc0' | Name: '' | Ip: '10.0.11.2' | Eth: '00-90-c8-e0-04-4f' ### Target[10.0.11.2_2]: 2:[EMAIL PROTECTED]::1:1::1 SetEnv[10.0.11.2_2]: MRTG_INT_IP="10.0.11.2" MRTG_INT_DESCR="esmc0" MaxBytes[10.0.11.2_2]: 1250000 Title[10.0.11.2_2]: Traffic Analysis for 2 -- LMS3000 PageTop[10.0.11.2_2]: <H1>Traffic Analysis for 2 -- LMS3000</H1> <TABLE> <TR><TD>System:</TD> <TD>LMS3000 in Paxton Tower CCU101</TD></TR> <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> <TR><TD>Description:</TD><TD>esmc0 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR> <TR><TD>Ip:</TD> <TD>10.0.11.2 ()</TD></TR> </TABLE> ### Interface 3 >> Descr: 'rdr1' | Name: '' | Ip: '' | Eth: '00-90-c8-60-04-4f' ### Target[10.0.11.2_3]: 3:[EMAIL PROTECTED]::1:1::1 SetEnv[10.0.11.2_3]: MRTG_INT_IP="" MRTG_INT_DESCR="rdr1" MaxBytes[10.0.11.2_3]: 343750 Title[10.0.11.2_3]: Traffic Analysis for 3 -- LMS3000 PageTop[10.0.11.2_3]: <H1>Traffic Analysis for 3 -- LMS3000</H1> <TABLE> <TR><TD>System:</TD> <TD>LMS3000 in Paxton Tower CCU101</TD></TR> <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> <TR><TD>Description:</TD><TD>rdr1 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>343.8 kBytes/s</TD></TR> </TABLE> _____________________________________________________________________________ Any suggestions? Thanks again for the help! Joe -----Original Message----- From: Dean Hoium [mailto:[EMAIL PROTECTED] Sent: Thu 11/15/2007 1:10 PM To: Joe Reinhart Subject: RE: [mrtg] Growright I think it means grow from right, not grow to the right. I have mine setup with grow right so they stat on the right and grow to the left. The right side is most current data. Thank You, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Reinhart Sent: Thursday, November 15, 2007 11:41 AM To: [email protected] Subject: [mrtg] Growright I am a complete noob not only to MRTG, but Linux as well, so please keep responses as simple as possible for the simpleton. I cannot get my graphs to grow right, even though I am using the growright global option. As far as i can see, I have not set anything to growleft locally in the interfaces, so I don't know why it isn't working like I want it to. Does anyone have any suggestions as to what I can do? Thanks in advance, Joe Reinhart No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.33/1132 - Release Date: 11/15/2007 9:34 AM
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
