Thanks for your help! Will give it a try. Regards, Ed Dela Cruz GTA Inet Support http://www.teleguam.net
----- Original Message ----- From: "John Barbieri" <[EMAIL PROTECTED]> To: "Ed Dela Cruz" <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Saturday, December 01, 2007 12:00 AM Subject: Re: [mrtg] MRTG Graph Drops Off after 128mbps > You have to use 64bit counters. > > Usually, you can ad :::::2 after the target line, and that will use > 64bit counters. > > > --John > > Ed Dela Cruz wrote: >> Hi, >> We're using MRTG to monitor our bandwidth usage on our DS3 >> links. There seems to be a problem with the graphing if it goes above >> 128mbps. I've attached a capture of whats happening. >> >> Figure's 1 to 3 show our 3 DS3's traffic and figure 4 shows that >> traffic combined. For some reason, the combined traffic is showing >> major drops in bandwidth, but the 3 DS3's show normal bandwidth usage >> during that same time. >> >> It looks like the combined graph is chopping whenever the bandwidth >> usage goes above 128mbps. The max speed for the graphs is set to >> 150Mbits/s. I'd appreciate if anyone could share any info that might >> help out. >> >> Regards, >> Ed Dela Cruz >> GTA Inet Support >> http://www.teleguam.net > _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
