I have a windows system, with the MRTG Bundle ver. 2.10 installed. Initially I
didn't have any problems it work without any problems, now when I rerun the
update router batch file I receive a lot of pearl errors. See the attached file:
Garon Ashby
Network Specialist
Kansas City Kansas Community College
913 288-7431
[EMAIL PROTECTED]
This will configure MRTG_Bundle for your system.
New Features of MRTG_Bundle 2.0.1
1) Added a Update_MyRouters tools to update MRTG with new
routers and switches.
2) Changed the port that Apache runs on from 8080 to 9191
3) RRDtool database instead of using flat files.
4) Routers2.cgi interface instead of the flat graphs.
5) One minute check intervals.
6) Automatic configuration of CPU(s), Hard Disk, and memory
for the localhost.
7) Installation of SNMP4W2K for better Windows monitoring.
8) Elimination of the MRTG service.
8) Cron now runs MRTG once a minute for each config file.
9) Unix Shell Script installer. (Hey, I'm a *nix guy)
10) Add routers and switches during the install. Don't forget
to update the c:\mrtg\mrtg\bin\myrouters.txt file.
11) Changed to Apache 1.3 from 2.0. (Not as big as 2.0)
Please note, that this installation script it case sensitive.
Type all your input in lower case.
Press Enter to continue...
Make sure you have SNMP installed on this local machine
if you want to monitor bandwidth, cpu, hard disk
and memory usage in your MRTG graphs.
Please note, due to the fact that Microsoft has supplied
a crippled implimenation of SNMP, it will be necessary
to install a program called SNMP4W2K in order to monitor
this local machine. If you choose to proceed then this, then
the installer will start the setup program of SNMP4W2k for you.
Do you want to monitor this machine and install SNMP4W2K? (y/n) -->
y
Please note, Microsoft enabled spinlocks incorrectly on SMP
machines which will cause the 2nd CPU's SNMP information
to not be totally accurate.
Microsoft has stated that they will not fix this.
I think the real reason behind this is that they want you
to buy their expensive monitoring tools.
Does this computer have 1 or 2 CPUs
Enter (1/2) -->
1
Starting the install of SNMP4W2K.
Press enter when the install of SNMP4W2K is complete.
MRTG_Bundle v2.0 now supports adding external routers and switches.
Just edit the file called "c:\mrtg\mrtg\bin\myrouters.txt"
and add the community string and router to each line of the file.
Example myrouters.txt:
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
etc.
Have you prepared a myrouters.txt file? (y/n) -->
y
Here is all the information that I have gathered before I proceed:
--> You have installed SNMP on this local machine so it can be added to MRTG.
--> You have 1 processors.
--> You have prepared a "c:\mrtg\mrtg\bin\myrouters.txt" file
Do you wish to continue with these options? (y/n) -->
y
c:\mrtg\shellscript.sh: no matches found: /mrtg/mrtg/bin/*.cfg [128]
--base: Get Device Info on [EMAIL PROTECTED]:
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache [EMAIL PROTECTED]: Descr MS TCP Loopback interface --> 1
--snpo: confcache [EMAIL PROTECTED]: Descr Intel(R) PRO/100 VE Network
Connection
- Packet Scheduler Miniport --> 2
--snpo: confcache [EMAIL PROTECTED]: Ip 127.0.0.1 --> 1
--snpo: confcache [EMAIL PROTECTED]: Ip 192.168.213.215 --> 2
--snpo: confcache [EMAIL PROTECTED]: Type 24 --> 1
--snpo: confcache [EMAIL PROTECTED]: Type 6 --> 2
--snpo: confcache [EMAIL PROTECTED]: Eth --> 1
--snpo: confcache [EMAIL PROTECTED]: Eth 00-01-80-0a-4c-fb --> 2
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifSpeed
--base: Get Device Info on [EMAIL PROTECTED]:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.200.10" [192.168.200.10].161)
community: "Public"
request ID: 1948300615
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:
at c:/mrtg/mrtg/bin/cfgmaker line 689
--base: Get Device Info on [EMAIL PROTECTED]:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.201.10" [192.168.201.10].161)
community: "Public"
request ID: -1554740905
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:
at c:/mrtg/mrtg/bin/cfgmaker line 689
--base: Get Device Info on [EMAIL PROTECTED]:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.202.10" [192.168.202.10].161)
community: "Public"
request ID: 1984730853
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:
at c:/mrtg/mrtg/bin/cfgmaker line 689
--base: Get Device Info on [EMAIL PROTECTED]:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.203.10" [192.168.203.10].161)
community: "Public"
request ID: -1728968507
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:
at c:/mrtg/mrtg/bin/cfgmaker line 689
--base: Get Device Info on [EMAIL PROTECTED]:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.204.10" [192.168.204.10].161)
community: "Public"
request ID: -1566811615
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:
at c:/mrtg/mrtg/bin/cfgmaker line 689
--base: Get Device Info on [EMAIL PROTECTED]:
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
