I am having problems reporting on a Cisco 2924 switch. I had MRTG setup and running on a previous Cisco switch, but it died and now I can't get this one working correctly. I have SNMP configured on the switch with the following config line: snmp-server community ninthbrain RO I used the following command to generate my mrtg.cfg file: cfgmaker --output=mrtg.cfg [EMAIL PROTECTED] ADDRESS OF SWITCH} I then updated the WorkDir line manually. I also setup cron to run the mrtg command on the cfg file with a 5 minute interval. At this point, MRTG seems to working correctly. There are no errors and the log files are collecting data. The problem however, is the data the log files are collecting. All of my ports are reporting the same data and all of my graphs are a flat line at about 35 b/s. An example from one of my log files is: 1209865204 102168435 1664983983 1209865204 0 35 0 35 1209864905 0 35 0 35 1209864900 0 35 0 35 .... (the rest of the lines are all 0 35 0 35) Has anyone had this problem??? Any ideas on how to fix it? I only found one other post with a similar problem, but no solution mentioned.
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
