Hi Eric,
I found that in the docs for mrtg 2.16. I tried it since the
values I get from the snmpwalk are not integers, I need the number of
lines returned:
Counted SNMP Walk
In other situations, an snmpwalk is needed to count rows, but the
actual data is uninteresting. For example, counting the number of
mac-addresses in a CAM table, or the number of simultaneous dialup
sessions. You can get MRTG to count the number of instances by
prepending the OID with the string CnTWaLK. The following will retrieve
the number of simultaneous VOIP calls on some routers:
Example:
Target[myrouter]:
CnTWaLK1.3.6.1.4.1.9.10.55.1.1.1.1.3&CnTWaLK1.3.6.1.4.1.9.10.55.1.1.1.1.
3:[EMAIL PROTECTED]
But not working right...
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Brander
Sent: Monday, May 19, 2008 3:57 PM
To: [email protected]
Subject: Re: [mrtg] Voice Calls Help
On Mon, May 19, 2008 at 1:42 PM, Frank Misak
<[EMAIL PROTECTED]> wrote:
>
> Target[NODE_IP_calls]:
>
CnTWaLK1.3.6.1.4.1.9.9.63.1.3.1.1.1&CnTWaLK1.3.6.1.4.1.9.9.63.1.3.1.1.1:
<READSTRING>@<NODEIP>:
>
What is "CnTWaLK"? Those should not be there. Might not be your only
problem but it's a start.
HTH,
Eric Brander
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
This communication, including attachments, is for the exclusive use of
addressee and
may contain proprietary, confidential and/or privileged information. If you are
not
the intended recipient, any use, copying, disclosure, dissemination or
distribution
is strictly prohibited. If you are not the intended recipient, please notify
the sender
immediately by return e-mail, delete this communication and destroy all copies.
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
